GLOW — Bespoke Biology
Combination Protocol · Injectable · Ready to Use

GLOW

Three of the most powerful repair and renewal peptides combined into one ready-to-use injectable. GLOW repairs damaged tissue, reduces inflammation, and rebuilds the skin, collagen, and connective tissue that aging and injury wear down over time.

This is the protocol for clients who want comprehensive recovery and visible renewal — faster healing and a more youthful appearance, addressed together.

Repair & Recovery Immune & Inflammation Skin & Collagen Injectable
What GLOW Does For You
3-in-1
Repair, inflammation, and skin renewal — one injection
4–6 wks
Per active cycle, then 2–4 weeks off for GHK-Cu cycling
Week 1
0.1 mL daily (dial 10) — starting dose while your body adjusts
Week 2+
0.15 mL daily (dial 15) — full maintenance dose
BPC-157 · TB-500 · GHK-Cu
Three ingredients targeting repair, systemic healing, and collagen renewal
Important
This product is not FDA-approved and is available through licensed compounding pharmacies for use under medical supervision. This page is for educational purposes only — always work with a qualified healthcare provider before starting any injectable protocol.
/

The Three Ingredients

GLOW combines three peptides that each target a different repair and renewal pathway. Used together, they do more than any single peptide can — and they don't overlap. Each one handles a different job, and all three are more effective because the others are present.

01
BPC-157
Structural tissue repair — drives healing at tendons, ligaments, muscle, and the gut lining directly at the injury site
02
TB-500
Systemic healing and circulation — works body-wide, mobilizes cells to where repair is happening, and reduces inflammation throughout
03
GHK-Cu
Collagen and elastin renewal — skin firmness, hair thickness, connective tissue regeneration, and broad anti-aging effects at the cellular level

/

How These Three Work Together

Repair and renewal aren't separate processes — they're connected. Inflammation slows tissue healing. Poor circulation limits how quickly repair cells reach an injury. Low collagen means slower recovery and accelerated aging in skin and joints. GLOW addresses all three links in that chain at the same time.

BPC-157 targets the injury site directly. TB-500 works body-wide — reducing inflammation and mobilizing healing cells to wherever they're needed. GHK-Cu rebuilds the collagen and elastin matrix that holds everything together, while also activating gene expression pathways associated with younger, more resilient cells. Each ingredient amplifies the others.

Structural
BPC-157
Drives localized repair of tendons, ligaments, muscle, and gut tissue — working directly at the site of damage.
+
Systemic
TB-500
Reduces inflammation body-wide and helps healing cells migrate to wherever repair is actively happening.
+
Renewal
GHK-Cu
Activates collagen and elastin production — renewing skin, connective tissue, and hair while protecting cells from age-related decline.

What makes GLOW different from BPC-157 & TB-500 alone? GHK-Cu (Copper Peptide) is what separates GLOW from the standard BPC-157/TB-500 Wolverine Stack. It adds a third layer of renewal — stimulating collagen and elastin synthesis, improving skin texture and firmness, supporting hair thickness, and activating genes linked to cellular longevity. If aesthetic renewal and anti-aging are part of your goals alongside physical repair, GLOW is the appropriate formula.


/

What GLOW Does For Your Body

Most people feel reduced inflammation and improved joint comfort within the first 1–2 weeks. Structural tissue repair builds through weeks 2–4. Visible skin and collagen changes from GHK-Cu typically appear through weeks 3–6 of the active cycle.

Tendon, Ligament & Muscle Repair

BPC-157 and TB-500 together target structural tissue healing from two angles — BPC-157 drives repair directly at the injury site while TB-500 works body-wide to reduce the inflammation that slows everything down and send repair cells where they're needed. This combination is particularly effective for chronic injuries that haven't fully healed on their own.

Skin Firmness & Collagen Renewal

GHK-Cu is one of the most potent naturally-occurring signals for collagen and elastin production in the body. Within a 4–6 week active cycle, users typically notice improved skin firmness, reduced fine lines, and more even texture. These changes reflect actual structural protein being rebuilt beneath the skin's surface — not surface-level treatment.

Reduced Inflammation & Joint Pain

Both BPC-157 and TB-500 have strong anti-inflammatory effects — BPC-157 targets localized inflammation at injury sites, while TB-500 addresses systemic inflammation throughout the body. Most users report meaningful reduction in joint discomfort, stiffness, and swelling within the first 1–2 weeks of the protocol.

Hair Thickness & Scalp Health

GHK-Cu has well-documented effects on hair follicle function — it extends the active growth phase of hair follicles, improves follicle density, and increases hair thickness. Users on consistent GLOW cycles often report noticeably fuller and healthier hair as a secondary benefit that compounds over multiple cycles.

Faster Recovery from Training

The BPC-157 and TB-500 combination reduces post-exercise inflammation and accelerates muscle fiber repair, allowing harder training with shorter recovery windows. GHK-Cu adds an additional layer of connective tissue support — helping tendons and ligaments rebuild faster so they keep pace with muscle development and resist cumulative overuse injury.

Cellular Anti-Aging

GHK-Cu has been shown to alter gene expression in ways that favor repair and resilience — activating antioxidant and renewal pathways while quieting the inflammatory signals that drive cellular aging. Over a full 4–6 week active cycle, users often notice a broad sense of physical renewal: less discomfort, better recovery, improved skin, and more resilient overall health that builds across multiple cycles.


/

GLOW vs. KLOW — Which Is Right for You?

GLOW and KLOW share the same three ingredients. KLOW adds a fourth — KPV — specifically for clients with gut or immune conditions.

If your main concern is… GLOW KLOW
Tissue repair, tendon or muscle recovery ✓ Strong ✓ Strong
Skin, collagen, and aesthetic renewal ✓ Strong ✓ Strong
General recovery and physical renewal ✓ Ideal ✓ Ideal
Gut inflammation, leaky gut, or IBS Partial (BPC-157 only) Full support (BPC-157 + KPV)
Mast cell activation or immune dysregulation Minimal Targeted (KPV)
Post-viral recovery or systemic inflammation Partial Full support (KPV + TB-500)

Highlighted rows = where KLOW adds meaningful benefit over GLOW. If gut health, immune regulation, or chronic inflammation are part of your picture, KLOW is the more appropriate choice. For repair and aesthetic renewal without those concerns, GLOW is the ideal formula.


/

Dosing Protocol

GLOW uses a two-phase protocol — a lighter starting dose in Week 1, then the full dose from Week 2 onward. Both phases use the same 5-days-on / 2-days-off schedule. Your vial comes as a ready-to-use liquid. No mixing or preparation required.

Week 1 · Starting Dose
0.1 mL per injection — dial to 10
Inject 0.1 mL (pen dial to 10) subcutaneously, Monday through Friday. Rest Saturday and Sunday. This lighter dose lets your body adjust to the formula before moving to the full amount. Most people notice early anti-inflammatory effects — reduced joint stiffness and improved comfort — during this first week.
Week 2 & Beyond · Full Dose
0.15 mL per injection — dial to 15
From Week 2, increase to 0.15 mL (pen dial to 15) and continue on the same 5-days-on / 2-days-off schedule. Continue for the remainder of your 4–6 week cycle. Structural tissue repair and visible skin changes from GHK-Cu typically build through this phase. Continue as directed by your provider.
Phase Dose Schedule What to expect
Week 1 0.1 mL (dial 10) 5 days on / 2 days off Adjustment week — reduced inflammation, improved comfort
Week 2+ 0.15 mL (dial 15) 5 days on / 2 days off Full repair and collagen renewal builds through weeks 2–6
Method Subcutaneous — just under the skin, not into muscle
Sites Abdomen or upper thigh — rotate sites each week

Using a pen injector? Week 1: dial to 10 (0.1 mL). Week 2+: dial to 15 (0.15 mL). Press the button until the dial returns to "0," then hold the needle in place for 5 seconds before removing. Always use a fresh needle and dispose in a sharps container immediately after use.

Step-by-step injection guide

1
Remove the pen cap
Wipe the rubber top of the vial with a fresh alcohol pad and let it dry for a few seconds.
2
Attach a fresh needle
Screw on a new sterile needle before every injection — never reuse a needle between injections.
3
Set the dial — 10 for Week 1, 15 for Week 2+
Turn the dial to 10 during your first week (0.1 mL). From Week 2 onward, turn it to 15 (0.15 mL).
4
Clean your injection site
Wipe the abdomen or upper thigh with an alcohol pad. Let it dry completely before injecting. Rotate to a different area each week to prevent irritation.
5
Inject and hold
Insert the needle just under the skin at a 45–90° angle. Press the pen button until the dial returns to "0." Hold the needle in place for 5 full seconds to ensure complete delivery.
6
Dispose safely
Remove the needle and place it immediately in a sharps disposal container. Never recap and reuse.

/

Dose Calculator

Pre-set to your standard doses: Week 1 — 10 units (0.1 mL) and Week 2+ — 15 units (0.15 mL). Enter your vial details and the calculator shows exactly how long your vial lasts across both phases. Defaults to a standard 60 mg total combo vial in 3 mL.

If your vial is a different size, update the mg and mL fields and all outputs recalculate automatically.

Your Vial

= 20.0 mg/mL total blend · each unit = 0.20 mg

1u10u ✓15u ✓30u50u
Draw This Amount
15
units on syringe
0.150
mL volume
How far to pull the plunger (1 mL syringe)
010u20u30u40u50u60u70u80u90u100u

mg per dose (total blend)
Total shots in this vial
Week 1 coverage (5×/wk at 10u)
Remaining shots after Week 1

Always confirm the concentration printed on your vial label. The GHK-Cu component (50 mg) is at a higher concentration than BPC-157 and TB-500 (5 mg each). The calculator uses total blend mg/mL — your provider may give ingredient-specific guidance that takes priority.


/

Quick Reference — Your Dose at a Glance

Based on a standard 60 mg combo vial (5 mg BPC-157 / 5 mg TB-500 / 50 mg GHK-Cu) in 3 mL = 20 mg/mL total. On a U-100 syringe: 1 unit = 0.01 mL = 0.20 mg total blend.

Phase Units Volume BPC-157 TB-500 GHK-Cu Shots / vial
Week 1 10 units 0.10 mL ~167 mcg ~167 mcg ~1.67 mg 30 shots
Week 2+ 15 units 0.15 mL ~250 mcg ~250 mcg ~2.50 mg 20 shots

At 5 injections/week: Week 1 uses 5 shots (half a week of the 30-shot count). Transitioning to 15 units from Week 2 gives you approximately 20 shots — covering 4 weeks at 5 injections/week. One vial comfortably covers a full 4–5 week cycle across both phases.


/

Common Questions

Does GLOW come pre-mixed or do I prepare it myself?+
Your Bespoke Biology GLOW formula comes as a fully pre-blended liquid — all three ingredients already combined in a single vial, ready to draw and inject. There is no mixing or preparation required. Just draw your dose with a fresh syringe and inject. Keep the vial refrigerated and use within 28–30 days of opening.
Why does the dose increase after the first week?+
Week 1 uses a lighter dose (0.1 mL) to let your body get used to the formula before stepping up to the full dose. GHK-Cu in particular can cause mild transient effects — brief redness at the injection site or temporary lightheadedness — that are more manageable when you start lighter. By Week 2, most people have adjusted and can move to the full 0.15 mL without issue. The repair and collagen benefits both build significantly during the Week 2+ phase.
What's the difference between GLOW and the BPC-157 & TB-500 Wolverine Stack?+
GLOW contains BPC-157 and TB-500 plus GHK-Cu (Copper Peptide). The Wolverine Stack is just BPC-157 and TB-500 — no GHK-Cu. GHK-Cu is what makes GLOW particularly valuable for clients who also want skin, collagen, and anti-aging benefits alongside their physical repair goals. If aesthetic renewal is part of your picture — improved skin firmness, reduced fine lines, hair thickness — GLOW is the appropriate formula. If your goals are purely physical recovery and inflammation with no aesthetic component, the Wolverine Stack is the more focused option.
How soon will I notice results?+
Most people notice reduced inflammation and improved comfort at injury sites within the first 1–2 weeks — often during the starting dose phase. Structural tissue improvements — better range of motion, less chronic pain, stronger tendons — typically build through weeks 2–4. Visible skin changes from GHK-Cu (improved firmness, texture, and brightness) generally begin to appear through weeks 3–6. Hair changes tend to be slower and are usually more noticeable after a second cycle.
Do I need to take time off between cycles?+
Yes — the standard approach is 4–6 weeks active, then 2–4 weeks off. The off period is particularly important for GHK-Cu, which contains copper — a mineral that accumulates with continuous use. Taking breaks ensures copper levels stay in a healthy range and keeps your skin and tissue receptors responsive to the collagen signals. Many people run 2–3 cycles per year and find that benefits compound over time with each cycle.
Can I use GLOW if my main goal is aesthetics, not injury repair?+
Yes — GLOW is well suited for aesthetic goals even without a specific acute injury. GHK-Cu's skin and collagen benefits are the reason many clients who don't have injuries specifically choose GLOW over the Wolverine Stack. The BPC-157 and TB-500 components provide general anti-aging and anti-inflammatory support that complements the collagen renewal work. Many clients use GLOW as a comprehensive skin, tissue, and wellness protocol rather than purely a recovery tool.
What's the difference between GLOW and KLOW?+
GLOW contains three ingredients: BPC-157, TB-500, and GHK-Cu. KLOW adds a fourth — KPV, a potent anti-inflammatory peptide specifically targeted at gut inflammation, leaky gut, mast cell activation, and immune dysregulation. If gut health, post-viral recovery, or chronic systemic inflammation are part of your clinical picture, KLOW is the more appropriate choice. If your goals are primarily tissue repair and aesthetic renewal without an inflammatory or gut component, GLOW is the right formula.
Can I stack GLOW with other Bespoke Biology products?+
Yes — GLOW pairs well with several other products. NAD+ & Glutathione provides cellular energy and antioxidant protection that supports the same repair pathways GLOW works through. CJC-1295 & Ipamorelin (the growth hormone stack) complements it well — growth hormone optimization and collagen renewal work in the same direction. Let your provider know everything you're taking so they can confirm timing and confirm the combination is right for your specific goals.
What side effects should I watch for?+
GLOW is generally very well tolerated. Most common: mild redness or irritation at the injection site (prevented by rotating sites each week), slight fatigue or lightheadedness after the first few injections, and occasional mild headache or brief nausea in the first 1–2 days. These typically resolve quickly as your body adjusts. The starting dose in Week 1 is specifically designed to minimize these effects before stepping up to the full dose. Contact your provider if anything feels unusual or persists.
How should I store GLOW?+
Keep your vial refrigerated at 35–46°F (2–8°C) at all times. Do not freeze it — freezing damages the liquid preparation. Keep it away from direct light and heat. Do not shake the vial. Write the date you first opened it on the label and use within 28–30 days. If you notice any cloudiness or discoloration, do not use it — contact your provider for a replacement.

/

Side Effects to Watch For

  • /Mild redness or irritation at the injection site — rotate sites each week to prevent this
  • /Slight fatigue or lightheadedness after the first few injections — usually resolves quickly
  • /Mild headache when first starting — typically gone within a day or two
  • /Rare: brief nausea shortly after injecting — more common in Week 1 at the starting dose; resolves as your body adjusts

Side effects are mild and typically appear only in the first week. The two-phase dosing protocol is designed specifically to minimize them. Contact your provider if anything feels unusual or doesn't clear up on its own.

Ready to begin

Order GLOW

USA-formulated, lab-verified liquid formula. Three peptides combined and ready to use — no mixing required. Includes full dosing guidance from our clinical team.

Schedule Consultation